Akai MPC4000 Manual del operador descargar pdf (Pagina 165)

Record page

155

Record mode

Record page

Recording a sample

Here you can record a sample, and make various settings for recording. You can also pro-

cess the sound through the internal effects as you record it.

To access this page ....... [RECORD] key

A Input block

B Record block

C Memory block

Functions

• [F1]/[F2] keys (RESET PEAK)

Resets the peak hold indicator that is shown in the level meter.

• [F4] key (Q-FX)

Opens the Q-FX window, where you can apply internal effects to an input signal as you

sample it.

• [F6] key (RECORD)

Setup block

Here you can make various settings related to sample recording.

A Input source ﬁeld

Selects one of the following sources for recording.

• ANALOG IN .............. The input signal from the rear panel REC IN [PHONO] jacks

or REC IN [LINE/MIC] jacks.

• DIGITAL IN ............... The input signal from the rear panel [DIGITAL IN] jack (only

if the IB-4D option is installed).

• MAIN OUT ................ The same signal as is output from the rear panel [MAIN

OUT] jacks.

• ADAT 1/2–7/8............. The input signal from the ADAT interface (only if the ADAT

option is installed).

B Mode ﬁeld

Selects one of the following to specify whether recording will be stereo or monaural.

• STEREO..................... Record the left/right input signals as a stereo sample.

• MONO L..................... Record the left input signal as a monaural sample.

• MONO R .................... Record the right input signal as a monaural sample.

C Bit ﬁeld

Selects the bit depth (16-bit or 24-bit) for recording.

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 265 266

Sin comentarios

Akai MPC4000 Manual del operador Pagina 165